Getting Started
![image_116](https://trackimo.com/wp-content/uploads/2024/01/image_116.webp)
![](/wp-content/uploads/2024/01/xcv.webp)
Charge your device. The device needs to be charged for at least 2hrs before the first use.
![turn_on_1](https://trackimo.com/wp-content/uploads/2024/01/turn_on_1.webp)
![](/wp-content/uploads/2024/01/xcvc.webp)
Turn on the device and start tracking. In order to check if the device is on, please make a short press on the power button - green light should appear. If not - make a 3s long press on the power button to switch the device on (to switch off - make a 3S long press on the button).
Button Functions
![Component_1](https://trackimo.com/wp-content/uploads/2024/01/Component_1.webp)
![TrackimoPlus Slate Back No Shadow 1](https://trackimo.com/wp-content/uploads/2024/04/TrackimoPlus-Slate-Back-No-Shadow-1.png)
Please note: If the green light flashes, the tracker is ON. If no light comes on, the tracker is OFF.
Device Notification
![](/wp-content/uploads/2024/01/battery-full.webp)
LOW BATTERY
When the battery percentage drops to 10%, an alert will be triggered using all the chosen communication methods. The user's specified phone number or email will receive the location details along with a text message.
![](/wp-content/uploads/2024/01/map-1.webp)
ZONE ENTRY/ZONE EXIT
A geofence is a virtual boundary that can be customized by the user. Whenever the tracker crosses the boundary, whether exiting or entering the defined area, the user will receive a notification within the app. Additionally, the user's specified phone number or email will receive the location information along with a text message.
Please take note that there is a cooldown period of 5 minutes between two consecutive alerts.
![](/wp-content/uploads/2024/01/frame.webp)
SOS KEY PRESSED
When the user enables SOS, both the location information and a text message will be sent to the phone number or email address that they have previously provided.
![](/wp-content/uploads/2024/01/speedometer.webp)
SPEED LIMIT
Once the user sets a speed limit for the device, they will receive an app notification whenever the tracker exceeds the designated speed. In such cases, the user will also receive the location information and a text message sent to the phone number or email address they have provided. Please be aware that there is a cooldown period of 5 minutes between consecutive alerts.
![](/wp-content/uploads/2024/01/smart-car.webp)
START MOVING
Once the tracker begins to move, the user will be notified within the app. Furthermore, the location information and a text message will be sent to the phone number or email address that the user has provided. Please note that there is a cooldown period of 5 minutes between two consecutive alerts.
![](/wp-content/uploads/2024/01/toggle-on.webp)
POWER ON/OFF
When the device is fully charged and powered on, a notification will be triggered to inform the user about the device being turned on. Similarly, when the device is shut down, a message will be sent to the user to notify them of the shutdown.
Device Lights
Device is starting up
(long press on power button)
![](/wp-content/uploads/2024/01/Frame_7.png)
Device is powering off
(press the power button for 35)
![](/wp-content/uploads/2024/01/Group_1000001977.png)
Device is online
(single press on power button)
![](/wp-content/uploads/2024/01/Frame_7.png)
Device is on but offline
(single press on power button)
![](/wp-content/uploads/2024/01/Frame_8.webp)
Activate SOS mode
(long press)
![](/wp-content/uploads/2024/01/Frame_9.png)
Battery is low
(flashes continuosly)
![](/wp-content/uploads/2024/01/Frame_10.png)
Device is charging
(connected to power)
![](/wp-content/uploads/2024/01/Frame_11.png)
Device is fully charged
![](/wp-content/uploads/2024/01/Frame_12.png)