General Information

These operating instructions are for the Trackimo+ Mini 2G GPS Tracker, which will simply be referred to as ‘tracker’ in the following. They contain important information regarding set-up and operation.

Before using the tracker, please read the operating instructions carefully. This particularly applies to the safety notes. Failure to adhere to these operating instructions may result in severe injury or damage to the tracker.
The operating instructions are based on the standards and rules in Force in the European Union.

When abroad, you must also observe country-specific guidelines and laws. Keep the operating instructions for future use. If you pass the tracker on to third parties, please be absolutely sure to include these operating instructions

Initial set-up

INSTALLING AND CHARGING THE BATTERY

When you unpack the tracker for the first time, the battery is empty. Charge it as follows:

  1. Connect the charging plug of the charging cable to the tracker with the magnetic charging port.
  2. Press and hold the on/of button for at least 3 seconds. The green light on the front of the tracker should blink for a few seconds.
  3. Put the tracker down and wait for at least 15 minutes.
The tracker will carry out initial GPS positioning. This is required for the device to function correctly. The tracker will then be ready for use and can be activated.

Please note: this procedure is only required the very first time the tracker is turned on.

ACTIVATING THE TRACKER VIA WEB

  1. Open your internet browser and go to plus.trackimo.com

  2. Click on "Add tracker" and follow the on-screen instructions.
  3. Insert your tracker IMEI and Device ID, and follow the instructions to activate your service plan.

ACTIVATING VIA APP

  1. Download the Trackimo+ app from the Apple Store or Google Play.
  2. Register or log into your Trackimo+ account.
  3. In the Devices tab click on "+" sign and follow the instructions.

Device Notification

LOW BATTERY

When the battery percentage drops to 10%, an alert will be triggered using all the chosen communication methods. The user's specified phone number or email will receive the location details along with a text message.

ZONE ENTRY/ZONE EXIT

A geofence is a virtual boundary that can be customized by the user. Whenever the tracker crosses the boundary, whether exiting or entering the defined area, the user will receive a notification within the app. Additionally, the user's specified phone number or email will receive the location information along with a text message. Please take note that there is a cooldown period of 5 minutes between two consecutive alerts.

SOS KEY PRESSED

When the user enables SOS, both the location information and a text message will be sent to the phone number or email address that they have previously provided.

SPEED LIMIT

Once the user sets a speed limit for the device, they will receive an app notification whenever the tracker exceeds the designated speed. In such cases, the user will also receive the location information and a text message sent to the phone number or email address they have provided. Please be aware that there is a cooldown period of 5 minutes between consecutive alerts.

START MOVING

Once the tracker begins to move, the user will be notified within the app. Furthermore, the location information and a text message will be sent to the phone number or email address that the user has provided.
Please note that there is a cooldown period of 5 minutes between two consecutive alerts.

POWER ON/OFF

When the device is fully charged and powered on, a notification will be triggered to inform the user about the device being turned on. Similarly, when the device is shut down, a message will be sent to the user to notify them of the shutdown.

Package contents

Button Functions

1. CHECKING THE CONNECTION Press the on/off button to check whether the tracker is on or off. If the green light comes on, the tracker is on, If no light comes on, the tracker is off.
You can check the tracker's activity by pressing the SOS button quickly. If the green light comes on, the tracker is activated.
Note: You can save battery life by increasing the tracking interval in the Trackimo+ app. As soon as the battery level is low, the red light will start to blink.
2. SOS If you press the SOS button for at least 3 seconds. the location and a text message wil lbe sent to the e-mail you have provided.

Device Lights

Switch On

(Press ON/OFF button and hold for 3 sec.)

Check if the device is OFF

(Press the on/off button quickly)

If the device is connected

(Press ON/OFF button and quick release)

Switch Off

(Press the ON/OFF button and hold for 3 seconds)

If device is not connected

(Press ON/OFF button and quick release)

Low battery
When device connects with cellular network and GPS

(Press the on/off button and quick release)

Battery is charging
Check if the device is ON

(Press the on/off button quickly)

Connected to a power source and battery is fully charged.