Your Trackimo Device will beep for different reasons. This includes when the device powers on, powers off, and connects to a GPS or GSM network. For a detailed explanation of the beeps, please refer to the user guide.

1. To power the device ON Press and hold the Power Button until the locator status LED indicator begins to glow. This will take approximately 2 seconds. A blinking green LED will then indicate that the device is operating correctly. […]

The SOS button needs to be pressed and held for 4 seconds to activate an alert. This helps prevent false SOS alerts.

Yes. You can activate a Trackimo Device for someone else using his Trackimo account credentials. However, if you are registering a new device under a new Trackimo account, you must have access to the email account used to click the […]

1. After you have fully charged and turned on your device for the first time: 2. Browse to our website www.trackimo.com and click Login button. 3. If you are not registered yet, click on Sign Up, enter your e-mail and password, retype […]

The device takes a while to get its initial charge, just keep the device plugged in for a couple of hours or overnight.

There will be a red LED blinking on the front face of the device.

Charge your Trackimo device using a standard universal USB AC adapter for a minimum of 12 hours. Then place your device in an area with a clear line of sight to the sky and power up your device by holding […]